HOME | NEWS |GROUP NEWS

GROUPNEWS

Perlite mining processing equipment—Fighter raymond mill

Perlite is a kind of volcanic eruption acid lava, vitreous rock formed by rapid cooling, it is a kind of white granular material with honeycomb structure. Perlite mines include perlite, obsidian and turpentine. The principle of perlite is that the perlite ore is crushed to form ore sand of a certain size, after preheating roasting, rapid heating, the water in the ore is vaporized, and it expands inside the softened vitreous ore to form a porous structure with a volume expansion of 10-30 times of non-metallic mineral products.

Perlite is brittle, expands when exposed to heat, but does not shrink when exposed to cold. It has pearl luster and grease luster, special arc-shaped cracks and fire resistance. It can be made into perlite products, with light weight, low thermal conductivity, strong sound absorption, non-corrosive, non-burning, acid-base, non-toxic and odorless, and is a high-efficiency and ultra-light thermal insulation, heat insulation, and sound insulation, decoration materials.

Fighter raymond mill has obvious advantages, performance characteristics, scientific and reasonable structure, and is widely used in the field of perlite grinding processing by virtue of advanced milling technology. It is a common equipment for perlite processing, the fineness of the finished product can be adjusted between 80-400 mesh, the output is 30%-40% higher than the traditional mill, and the energy consumption is greatly reduced.

Number of grinding rollers: 3-5

Feeding size: 30mm

Finished product output: 1-25t/h

Product fineness: 0.022-0.18mm

Application scope: This mill can be widely used in metallurgy, chemical rubber, coatings, plastics, pigments, inks, building materials, medicine, food and other processing fields. The grinding effect is significant, and the technical level is leading domestically. It is an ideal equipment for non-metallic mineral processing.

Application materials: High-yield and efficient processing of non-metallic minerals such as bauxite, titanium dioxide, ilmenite, phosphate rock, clay, graphite, calcium carbonate, barite, calcite, gypsum, dolomite, potash feldspar, etc. The fineness adjustment is convenient and the operation is simple.

Grinding characteristics: The mill effectively increases the unit output of a single device and reduces the energy consumption per unit output. It has the technical advantages of wide use, simple operation, convenient maintenance, stable performance, high efficiency, environmental protection and high cost performance.

<<Previous:How to configure the dry sand production line

<<Next:What equipment is needed for a limestone grinding production line with 50 tph?

Related News...

Engineers arrive in Russia to provide professional services to customers2022-06-30

The configuration of 200tph stone production line2022-06-28

The difference between stone production line and sand production line2022-06-21

Introduction of PE Jaw Crusher2022-05-13

Sand and gravel aggregate production line with an output of 200 tons per hour2022-07-04

Limestone crushing production line with an output of 60-100 tons per hour2022-06-30

600 mesh coal gangue grinding powder production line

The advantages of tire mobile crushing plant2022-06-14

Copyright © 2004-2015 by Fighter Corporation All rights reserved

Tel: 0086-13525565831    E-mail:info@limingco-group.com