180 T/H Gold Ore Tracked Mobile Screening Project

HOME | CASE | 180 T/H Gold Ore Tracked Mobile Screening Project

180 T/H Gold Ore Tracked Mobile Screening Project

Equipment: Tracked mobile screening station

Place of use:

Processed material: Gold ore

Input size: Output size: 0–10 mm, 10–30 mm, and 30–50 mm

Capacity : 180 T/H

Chat OnlineLeave Message

A tracked mobile feeding and screening station has recently been commissioned in the screening section of a gold mine’s mining area for particle-size classification of gold ore. The equipment has a processing capacity of approximately 180 t/h and produces three product sizes: 0–10 mm, 10–30 mm, and 30–50 mm. The screen deck configuration can be adjusted according to the feed requirements of the downstream beneficiation process.
The ore body in this mining area is relatively dispersed, and relocations are frequent as the mining face advances. Previously, each relocation of the fixed screening line involved foundation preparation and equipment dismantling and reassembly, which was time-consuming and increased the ore haulage distance. The mobile screening station uses a tracked chassis and requires no concrete foundation. After arrival, it can be put into operation after brief commissioning; during mining face transitions, it can move and position itself, reducing foundation construction and auxiliary vehicle haulage.
In view of the high hardness and strong abrasiveness of the gold ore, wear-resistant materials are used for the screen panels, feed floor, and chute liners, and the replacement intervals of key wear parts can meet the requirements of continuous operation. During operation, the variable-frequency feeding system adjusts the feed rate according to the screen surface load, avoiding blockage caused by concentrated impact from large lumps of ore. The three product sizes remain within the acceptable range for the beneficiation process. The equipment is also equipped with a dust suppression device and a remote monitoring system, which reduces the frequency of on-site inspections; operating parameters and the status of core components can be viewed remotely.
In actual operation, the mobile screening station has achieved a good balance between relocation convenience and classification stability. It is suitable for gold ore screening scenarios with dispersed mining faces, frequent relocations, and limited time for early-stage infrastructure construction.

NECESSARY PRODUCTS

Copyright © 2004-2015 by Fighter Corporation All rights reserved

Tel: 0086-13525565831    E-mail:info@limingco-group.com